en
Installation and connection
58
Electrical connection
■
Connect the appliance to an
alternating current only, ranging from
220 V to 240 V and 50 Hz or 60 Hz
via a correctly installed socket with
protective earth conductor. See
rating plate for required fusing
9J
.
■
The socket must be near the
appliance and freely accessible
following installation.
If the plug is not freely accessible, an
allpole disconnector with a contact
opening of at least 3 mm must be
fitted on the installation side to
satisfy the relevant safety
instructions.
■
The connection may be modified
by technicians only.
■
A power cord extension may be
purchased from customer service
only.
■
Use only a residual current operated
circuit-breaker which features the
symbol
‚
. Only this extension
guarantees compliance with
the currently valid regulations.
■
The appliance features a water
damage protection system. Please
note the system will function
only
when the power supply
is connected.
Removal
Also observe
the sequence of worksteps here.
1.
Disconnect the appliance from the
power supply.
2.
Turn off the tap.
3.
Undo the waste water and drinking
water connection.
4.
Loosen fastening screws for the
furniture parts.
5.
If fitted, remove the base panel.
6.
Pull out the appliance, carefully
pulling the hose behind.
Summary of Contents for S517T80D6E
Page 1: ...en Instruction manual Dishwasher S...
Page 2: ...5HVHW VHF 6HWXS VHF...