Screw Jacks M0-M5 / J1-J5
14
8
Manufacturer’s Declaration
We hereby declare that the following product:
Worm gear screw jack, version M and J
with trapezoidal screws or ball screws
model N, R or V
in the sizes
M0 – M5, J1 – J5
for lifting and lowering loads
was manufactured in accordance with the EC machinery directive 2006/42/EC annex II B on incomplete
machinery.
This incomplete machinery must not be commissioned until the machine it is to be incorporated in has been
declared to comply with the provisions of the EC machinery directive, the harmonized standards, European
standards or the applicable national standards.
The manufacturer undertakes to forward the documentation on the incomplete machinery to national
authorities on request. The technical documentation was created according to annex VII B.
Person responsible for documentation:
Andreas Ries, Director of quality management
Address of the person responsible for documentation:
Neff Gewindetriebe GmbH
Karl-Benz-Str. 24
71093 Weil im Schönbuch
Germany
The following harmonized standards have been applied:
DIN EN ISO 12100-1 Safety of machinery – Basic concepts, general principles for design, part 1: Basic
terminology, methodology
DIN EN ISO 12100-2 Safety of machinery – Basic concepts, general principles for design, part 2: Technical
principles and specifications
The following national standards, guidelines and specifications have been applied:
BGV D8 Accident prevention regulations for hoist gears, lifting and towing equipment
Neff Gewindetriebe GmbH
Karl-Benz-Str. 24
71093 Weil im Schönbuch
+49(0)7157/53890-0
Weil im Schönbuch, 29.08.2012
Hartmut Wandel, Director
