NEFF T D82 Series, Instruction Manual

24

Note: 

The same cooking time can be automatically 

programmed for the all the hotplates. The programmed time 

passes independently for each of the hotplates.
The 

Basic settings

 chapter provides information on 

automatically programming the cooking time.

Changing or cancelling the time

Selecting the hotplate . Press the 

3

 symbol and change the 

cooking time with the 

+

 or 

-

 symbols, or set to 

‹‹

.

Once the time has elapsed

The hotplate switches off. A warning signal sounds and 

‹‹

appears for 10 seconds in the time program function display. 

The 

x

 indicator on the hotplate lights up. Pressing the 

3

symbol turns off the indicators and stops the beeping.

Notes

■

If cooking times have been programmed for various 

hotplates, the time programming function always displays the 

time for the selected hotplate.

■

Any cooking time can be programmed for up to 99 minutes.

The timer

The timer can be set for periods of up to 99 minutes. It is 

independent of the other settings. This function does not 

automatically switch off a hotplate.

How to program

No hotplate should be selected.

1.

Press the 

3

 symbol.  

‹‹

 and the symbol are shown in the 

time program function display 

W

2.

Press the 

+

 or 

-

 symbols. The basic setting appears. 

+

 symbol: 10 minutes.

-

 symbol: 5 minutes.

3.

Set the desired time using the 

+

 or 

-

 symbols. 

After a few seconds, the time will start to elapse.

Changing or cancelling the time

Press the 

3

 symbol several times until the 

W

 indicator lights 

up. Change the time or set it to 

‹‹

 with the 

+

 or 

-

 symbols.

Once the time has elapsed

A warning signal sounds. 

‹‹

 is displayed on the time program 

function display. After 10 seconds the indicators turn off.
Pressing the 

3

 symbol turns off the indicators and stops the 

beeping.

Keep warm function

This function is used for melting chocolate or butter and for 

keeping food warm.

To activate

1.

Select the hotplate.

2.

Within the next 10 seconds, press the 

–

 symbol.

The indicator 

–

lights up.

The "keep warm" function will have been activated.

To deactivate

1.

Select the desired hotplate.

2.

Press the 

–

 symbol.

The 

–

indicator disappears.

The hotplate turns off and the residual heat indicator appears.

Cleaning lock function

Cleaning the control panel while the hob is switched on may 

change the settings.
In order to avoid this, the hob has a cleaning lock function. 

Press the 

"

 symbol. A signal sounds. The 

Ú

 indicator lights up 

along with the 

"

 symbol. The control panel is locked for 

35 seconds. The control panel surface can now be cleaned 

without the risk of changing the settings.

Note: 

The lock does not affect the main switch. The hob may 

be switched off when desired.

Automatic time limitation

If the hotplate remains in use for a long time and no changes 

are made in the settings, the automatic time limitation function 

is triggered.
The hotplate stops heating. The 

”

, 

‰ 

 symbol and the residual 

heat indicator 

œ

/

•

 flash alternately in the display.

The indicator goes out when any symbol is pressed. The 

hotplate can now be reset.
When the automatic time function is used, it is governed by the 

selected power level (from 1 to 10 hours).

All manuals and user guides at all-guides.com