25
Keep warm function
This function is used for melting chocolate or butter and for
keeping food warm.
To activate
1.
Select the required hotplate using the Tipp control.
2.
Within the next 5 seconds, press the
–
symbol.
The
–
indicator lights up.
The "keep warm" function has been turned on.
To turn off
1.
Select the required hotplate using the Tipp control.
2.
Press the
–
symbol.
The
–
display turns off.
After five seconds, the hotplate turns off and the residual heat
indicator appears.
Cleaning lock function
Cleaning the control panel while the hob is switched on may
change the settings.
In order to avoid this, the hob has a cleaning lock function.
Remove the Tipp control. A signal sounds and the
"
indicator
lights up. The control panel is locked for 35 seconds. The
surface of the control panel can now be cleaned without risk of
changing the settings.
Note:
The lock does not affect the main switch. The hob may
be turned off when desired.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
”
and
‰
flash alternately.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
™‚
Childproof lock
‹
Deactivated.*
‚
Activated.
™ƒ
Audible signals
‹
Confirmation and error signals deactivated.
‚
Only confirmation signal deactivated.
ƒ
All signals activated.*
™†
Automatic programming of cooking time
‹
Turned off.*
‚
-
ŠŠ
Automatic shut-off time
™‡
Duration of the time program function warning signal
‚
10 seconds.
ƒ
30 seconds.
„
1 minute.*
*Factory settings
Summary of Contents for T T 2 Series
Page 2: ...2 Ø cm T T 2 ...
