NEFF T26CS12 Series, Instruction Manual

Getting to know your appliance       

en

5

:

Warning – Risk of injury! 

■

Cracks or fractures in the glass plate are 

dangerous. Shut immediately off all burners 

and any electrical heating element. Unplug 

the appliance from the mains or switch off 

the circuit breaker in the fuse box. Shut off 

the gas supply. Do not touch the appliance 

surface. Never switch on a faulty appliance. 

Contact the after-sales service.

Risk of injuries! 

■

Sudden changes in temperature may cause 

breakage of the glass. While using your 

hob, prevent any draughts and do not spill 

any cold liquids on it.

Risk of injuries! 

■

Pans which are damaged, are not the right 

size, hang over the edge of the hob or are 

not positioned correctly can cause serious 

injuries. Follow the advice and warnings 

provided relating to the cooking pans.

Risk of injuries! 

■

In the event of a malfunction, turn off the 

appliance’s gas and electricity supply. For 

repairs, call our Technical Assistance 

Service.

Risk of injuries! 

■

Do not tamper with the appliance's interior. 

If necessary, call our Technical Assistance 

Service.

Risk of injury! 

■

If a control knob is too stiff to turn or it is 

loose, it must not be used. Contact our 

after-sales service immediately to have the 

control knob repaired or replaced.

:

Warning – Risk of electric shock! 

■

Do not clean the appliance using steam 

cleaners.

Risk of electric shock! 

■

Cracks or fractures in the glass plate could 

cause electric shocks. Switch off the circuit 

breaker in the fuse box. Contact the after-

sales service.

*

Getting to know your 

appliance

Getting to know your appliance

You can find your appliance and the burner powers in 

the model overview. 

~

 Page 2

Controls and burners

Each control knob is marked with the burner it controls. 

You can use the control knobs to set the output 

required in each case to various positions between the 

maximum and the minimum settings. Never try to switch 

directly from position 0 to position 1 or from position 1 

to position 0.

It is essential to ensure that all the burner parts and pan 

supports are correctly installed for the appliance to 

work correctly. Do not swap the burner caps around.
Always remove the pan supports carefully. When 

moving a pan support, the pan supports next to it may 

also move.

Indicators

¢

Burner controlled by control knob

Û

Switched-off burner

9

Highest power setting and electric ignition

1

Lowest power setting

Elements

1

Ignition plug

2

Thermocouple

3

Burner cup

4

Burner cap

„