en
Cleaning
28
Ventilation system
The filter must be regularly cleaned or replaced in order
to guarantee efficient filtration of odours and grease.
Metal grease filter
The metal grease filter must be cleaned regularly.
:
Warning – Risk of fire!
Fatty deposits in the grease filter may catch fire.
Regularly clean the grease filter. Never operate the
appliance without a grease filter.
Saturation display
When the activated charcoal filters are saturated, an
audible signal sounds after the appliance is switched
off.
”
lights up on the display.
Do not wait any longer to replace the activated charcoal
filters.
If you have replaced the activated charcoal filters, you
should reset the saturation indicator so that the
”
display goes out.
After the appliance has been switched off,
”
lights up.
Press and hold the symbol for the ventilation system
until an audible signal sounds.
The activated charcoal filter saturation indicator has
now been reset.
Changing the activated charcoal filter (only in
circulating-air mode)
Activated charcoal filters trap the odour-causing
compounds in cooking smells. They are only used for
circulating-air mode.
The activated charcoal filter should be replaced
regularly. The saturation indicator on your appliance will
tell you how frequently this needs to be done.
Notes
■
The activated charcoal filters are included with the
appliance. When the activated charcoal filters need
to be replaced, they can be obtained from specialist
retailers, from our after-sales service or from our
online shop.
■
The activated charcoal filters cannot be cleaned or
reactivated.
■
Only use genuine replacement filters. This ensures
that the appliance performs optimally.
1.
Remove the metal grease filter.
Notes
– Grease may accumulate in the bottom of the
container. Hold the metal grease filter level to
prevent grease from dripping out.
– Make sure that the metal grease filter does not
fall and damage the cooktop.
2.
Remove the four activated charcoal filters and
dispose of them properly.
3.
Insert two of the activated charcoal filters into the left
and right of the appliance and slide them forwards.
4.
Insert the other activated charcoal filters into the left
and right of the appliance.
5.
Insert the metal grease filter.
Resetting the saturation displays
If you have replaced the activated charcoal filters, you
should reset the saturation indicator so that the
”
display goes out.
After the appliance has been switched off,
”
lights up.
Press and hold the symbol for the ventilation system
until an audible signal sounds.
The activated charcoal filter saturation indicator has
now been reset.
