23
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
No hotplate should be selected.
1.
Press on the
3
symbol, and the time program function
display shows
‹‹
.
2.
Select the required time using the Tipp control.
The timer starts to count down after a few seconds.
Once the time has elapsed
A warning beep sounds. The time program function displays
‹‹
and the indicator
V
comes on. Pressing any symbol turns
off the indicators and stops the beeping.
Changing or cancelling the time
Press the
3
symbol and change the time using the Tipp
control, or set to
‹‹
.
Keep warm function
The plate-warming plate is used for melting chocolate or butter,
and for keeping food warm.
To activate
1.
Select the required hotplate using the Tipp control.
2.
Within the next 5 seconds, press the
–
symbol.
The
–
indicator lights up.
The "keep warm" function has been turned on.
To turn off
1.
Select the required hotplate using the Tipp control.
2.
Press the
–
symbol.
The
–
display turns off.
After five seconds, the hotplate turns off and the residual heat
indicator appears.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
”
and
‰
flash alternately.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Cleaning protection
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning protection
function. Press the
"
symbol. An audible signal sounds. The
control panel is locked for 35 seconds. The surface of the
control panel can now be cleaned without risk of changing the
settings.
Note:
The lock does not affect the main switch. The hob may
be switched off when desired.
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
™‚
Childproof lock
‹
Off.*
‚
On.
™ƒ
Sound signals
‹
Most sounds off.
‚
Some sounds off.
ƒ
All sounds off.*
*Factory settings
Summary of Contents for T4.SW4 Series
