background image

en

    Twist-Pad with Twist knob

10

Residual heat indicator

The hob has a residual heat indicator for each hotplate. 

This indicates that a hotplate is still hot. Do not touch a 

hotplate while the residual heat indicator is lit up.
The following indicators are shown depending on the 

amount of residual heat:

Display 

 •

: High temperature

Display 

 œ

: Low temperature

If you remove the cookware from the hotplate during 

cooking, the residual heat indicator and the selected 

heat setting will flash alternately.
When the hotplate is switched off, the residual heat 

indicator will light up. Even after the hob has been 

switched off, the residual heat indicator will stay lit for as 

long as the hotplate is still warm.

j

Twist-Pad with Twist knob

Twist-Pad with Twist knob

The twistpad is the area in which you can use the twist 

knob to select the hotplates and heat settings. The twist 

knob automatically centres itself in the twistpad area.
The twist knob is magnetic and is placed on top of the 

twistpad. To activate a hotplate, touch the twist knob at 

the level for the required hotplate. Turning the twist 

knob selects the heat setting.

Position the twist knob on the twist pad so that it is in 

the centre of the indicators which delimit the twist pad 

area. 

Notes

Even if the twist knob is not entirely central, this will 

not affect how the twist knob works.

Always keep the twist knob clean. Soiling may impair 

its function.

Remove the twist knob.

If the twist knob is removed, the "Lock control panel for 

cleaning" function is activated.
The twist knob can be removed during cooking. The 

"Lock control panel for cleaning" function is activated 

for 35 seconds. If the twist knob is not placed back in 

position before this time elapses, the hob switches off.

:

Warning – Risk of fire! 

If during this 35 seconds a metallic object is placed in 

the twistpad area, the hob may continue to heat up. 

Therefore, always switch off the hob using the main 

switch.

Storing the twist knob

A strong magnet is located inside of the twist knob. 

Keep the twist knob away from magnetic data carriers 

such as credit cards and cards with magnetic strips. 

Otherwise, these data carriers may be damaged 

beyond repair.
The magnet could also cause faults on televisions and 

screens.

Note: 

The twist knob is magnetic. Metal particles stuck 

to the bottom could scratch the surface of the hob. 

Always clean the twist knob thoroughly.

Summary of Contents for T4**T4 Series





























Reviews: