NEFF T58 S1 Series, Instruction Manual

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Time-setting options    

en

17

O

Time-setting options

Time-sett

ing optio

ns

Your hob has three timer functions:

■

Programming the cooking time

■

Kitchen timer

■

Stopwatch function

Programming the cooking time

The hotplate automatically switches off after the time 

that is set has elapsed.

Setting procedure:

1.

Select the hotplate and the required heat setting.

2.

Touch the 

x

 symbol. The 

x

 display for the 

hotplate lights up.

‹‹

 lights up on the timer display.

3.

Use the twist knob to select the required cooking 

time.

The cooking time begins to elapse.

Notes

■

The same cooking time can be set automatically for 

all hotplates. The set time for each of the hotplates 

counts down independently.

You can find information on automatically 

programming the cooking time in section 

~

 "Basic 

settings"

■

If the flexible cooking zone is selected as the only 

hotplate, the set time for the entire cooking zone is 

the same.

■

If the Move function is selected for the combined 

hotplate, the set time for the three hotplates is the 

same.

Frying sensor

If a cooking time has been programmed for a hotplate 

and the frying sensor has been activated, the cooking 

time will not begin to count down until the selected 

temperature setting has been reached.

Changing or deleting the time

Select the hotplate and then touch the 

x

 symbol.

Change the cooking time using the twist knob or on the 

control panel or set 

‹‹ 

 to delete the programmed 

cooking time.

When the time has elapsed

The hotplate switches off. An audible signal sounds, 

‹

appears in the hotplate display and 

‹‹

 appears in the 

timer display for one minute. The hotplate indicator 

x

flashes.Touch any symbol; the indicators go out and the 

audible signal ceases.

Notes

■

If a cooking time was programmed for several 

hotplates, the cooking time which ends first appears 

in the timer display. The 

x

 display for the hotplate 

lights up.

■

Select the relevant hotplate to call up the remaining 

cooking time for a hotplate. The cooking time is 

displayed for 10 seconds.

■

You can set a cooking time of up to 99 minutes.

The kitchen timer

You can use the kitchen timer to set a time of up to 99 

minutes. 
This functions independently from the hotplates and 

from other settings. This function does not automatically 

switch off a hotplate.

How to activate the function

1.

Touch the 

.

 symbol: 

‹‹

 and the 

b

 indicator appear 

in the timer display.

2.

Use the twist knob to select the required time.

3.

Touch the 

.

 symbol again to confirm the selected 

time.

The time begins to elapse.

Changing or deleting the time

Touch the 

.

 symbol and use the twist knob to change 

the time or set it to 

‹‹

.

When the time has elapsed

An audible signal sounds for one minute and the 

‹‹

symbol flashes in the timer display. Touch the 

.

symbol again: The displays go out and the audible 

signal ceases.