NEFF T58 T2 Series, Instruction Manual

Operating the appliance       

en

11

Operating the hob without the twist knob

The hob can also be operated without the twist knob:

1.

Switch on the hob using the main switch.

2.

Within the next 5 seconds, simultaneously touch and 

hold the 

œ

 and 

.

 symbols for 4 seconds. An 

audible signal will sound.

3.

Touch the 

.

 symbol repeatedly until the indicator for 

the required hotplate lights up.

4.

Then set the required heat setting using the 

œ

 or 

x

 symbol.

The hotplate has now been activated.

Notes

■

The timer function cannot be activated without the 

twist knob.

■

The twist knob can be placed back on the twistpad 

at any time.

1

Operating the appliance

Operating the appliance

This chapter explains how to set a hotplate. The table 

shows heat settings and cooking times for various 

meals.

Switching the hob on and off

The main switch is used to switch the hob on and off.
To switch on: Touch the 

#

 symbol. The display above 

the main switch lights up. The hob is ready to use.
To switch off: Touch the 

# 

 symbol until the display 

above the main switch goes out. All hotplates are 

switched off. The residual heat indicator remains lit until 

the hotplates have cooled down sufficiently.

Notes

■

The hob switches off automatically if all hotplates 

have been switched off for more than 15 seconds.

■

The selected settings are stored for four seconds 

after the hob has been switched off. If the hob is 

switched on again within this time, the previous 

settings are applied.

Setting a hotplate

Set the required heat setting using the twist knob. 
Heat setting 1 = lowest setting. 
Heat setting 9 = highest setting.
Every heat setting has an intermediate setting. This is 

marked with a dot.

Notes

■

To protect the fragile parts of your appliance from 

overheating and electrical overloading, the hob may 

temporarily reduce the power.

■

In order to prevent the appliance from producing 

excess noise, the hob may temporarily reduce the 

power.

Selecting a hotplate and heat setting

The hob must be switched on.

1.

Select the hotplate. To do this, touch the twist knob 

in the appropriate area for the required hotplate.

2.

Turn the twist knob until the required heat setting 

appears in the heat setting display.

The heat setting is set.