NEFF T58TS6BN0, Instruction Manual

en

    Operating the appliance

14

1

Operating the appliance

Operating the appliance

This chapter explains how to set a hotplate. The table 

shows heat settings and cooking times for various 

meals.

:

Warning – Risk of burns! 

The filter cover will get very hot very quickly if left on the 

hob. Never place the filter cover on the hob.Do not 

place pots, pans or other hot objects on the filter cover.

Note: 

Switch on the ventilation system when you start 

cooking and switch it off again a few minutes after you 

have finished cooking. This is the most effective way of 

removing steam from the kitchen.

Note: 

Never use the appliance without the container, 

metal grease filter or filter cover.

Switching the hob on and off

The main switch is used to switch the hob on and off.
To switch on: Touch the 

#

 symbol. The display above 

the main switch lights up. The hob is ready to use.
To switch off: Touch the 

# 

 symbol until the display 

above the main switch goes out. All hotplates are 

switched off. The residual heat indicator remains lit until 

the hotplates have cooled down sufficiently.

Notes

■

The hob will automatically switch itself off if all 

hotplates have been switched off for more than 

30 seconds and the ventilation system is off.

■

The selected settings are stored for 4 seconds after 

the hob has been switched off. If you switch it back 

on during this time, the hob will operate using the 

stored settings.

Setting a hotplate

Set the required heat setting using the twist knob. 
Heat setting 1 = lowest setting. 
Heat setting 9 = highest setting.
Every heat setting has an intermediate setting. This is 

marked with a dot.

Selecting a hotplate and heat setting

The hob must be switched on.

1.

Select the hotplate. To do this, touch the twist knob 

in the appropriate area for the required hotplate.

2.

Turn the twist knob until the required heat setting 

appears in the heat setting display.

The heat setting is set.

Changing the heat setting

Select the hotplate and change the heat setting using 

the twist knob.

Switching off the hotplate

Select the hotplate and turn the twist knob until 

‹

appears. The hotplate switches itself off and the 

residual heat indicator lights up.

Notes

■

If no pan has been placed on the hotplate, the 

selected power level flashes. After a certain time has 

elapsed, the hotplate switches off.

■

If a pan has been placed on the hotplate before 

switching on the hob, it will be detected within 

20 seconds of pressing the main switch and the 

hotplate will be selected automatically. Once 

detected, select the power level within the next 

20 seconds or the hotplate will switch off.

If more than one pan is placed on the hob, only one 

will be detected when switching it on.

■

The ventilation system must be switched off 

separately. 

~

 "Switching off the ventilation system" 

on page 15

1.

2.