NEFF T74F87N0, Instruction Manual

30

Warnings

Warnings are displayed if an error occurs within the appliance 

which means you can only continue to use the hob with 

limitations. Follow the instructions on the display and touch 

the 

Ñ

 display area to close the warning.

Notes

■

Warnings are displayed with a red line.

■

For some warnings, an error code is displayed (e.g: [error 

code 0003])

If necessary, specify the error code when you contact the after-

sales service.

Error messages

Error messages are displayed if errors or malfunctions occur 

within the appliance with the result that you cannot continue to 

use the hob.
Disconnect the appliance from the power supply. Wait a few 

seconds and reconnect it. If the display appears again, call the 

after-sales service.

Notes

■

Warnings are displayed with a red line.

■

For some error messages, an error code is displayed (e.g: 

error code 0003)

If necessary, specify the error code when you contact the after-

sales service.

Tips

3FTUSJDUFEGVODUJPOT

:PVDBODPPLVTJOHSFTUSJDUFEGVODUJPOT
*GUIFQSPCMFNQFSTJTUTTXJUDIUIFBQQMJBODFPGG
BOEPOBHBJOBUUIFIPVTFIPMEGVTFPSDJSDVJUCSFBLFS
JOUIFGVTFCPY$BMMUIF$VTUPNFS4FSWJDFPGZPVS
DPVOUSZBTTPPOBTUIJTJOGPSNBUJPOBQQFBSTBHBJO
$POUBDUEBUBVOEFSXXXOFGGJOUFSOBUJPOBMDPN

4ZTUFNFSSPS

4XJUDIPGGUIFBQQMJBODFBUUIFIPVTFIPMEGVTF
PSDJSDVJUCSFBLFSJOUIFGVTFCPY8BJUBGFX
TFDPOETBOEUIFOTXJUDIJUCBDLPO$BMMUIF
$VTUPNFS4FSWJDFPGZPVSDPVOUSZBTTPPOBT
UIJTJOGPSNBUJPOBQQFBSTBHBJO$POUBDUEBUB
VOEFSXXXOFGGJOUFSOBUJPOBMDPN

Problem

Remedy

The size or shape of the cookware is not displayed correctly 

on the Touch display.

Differences in how the cookware is shown on the display are normal 

and do not adversely affect the correct operation of the hob (particu-

larly small cookware is shown as a round hotplate).
Two hotplates that are quite close to each other may be displayed 

as one hotplate. Redistribute the cookware.
Never place the cookware outside of the usable cooking surface.

The hotplate power level cannot be increased.

The overall output of the hob has been limited. Adjust the overall 

output under “

Power management

” in the Options menu.

Very large cookware may affect the maximum power level of other 

hotplates on the same half of the hob. Redistribute the cookware.

The powerBoost function has been deactivated or cannot be 

activated.

You can only activate the powerBoost function once on the right and 

left-hand halves of the hob. If a second hotplate is switched on or is 

already in operation, the powerBoost function will not be available or 

is deactivated and the hotplate returns to power level 

9.0

.

The overall output of the hob has been limited. Adapt the overall out-

put under “

Power management

” in the Options menu.

An audible signal sounds if there is an object on the touch 

display.

Remove the object and acknowledge the indicator on the display. 

You can now reset the hob.

The cookware is not detected.

The cookware is outside the appropriate size. Sizes with a diameter 

of 90 to 340 mm are suitable.
There may be liquid under the cookware. Ensure that the base of the 

cookware is dry.
The cookware may not be suitable for induction cooking.

The hob switches off automatically

If no hotplate is in operation on the hob and you do not change the 

settings for a prolonged period of time, the hob will automatically 

switch off.

The hotplate cannot be adjusted.

Only 2 hotplates can be in operation on each side of the hob.
An item of cookware in the centre of the hob occupies one hotplate 

on each side of the hob. You can only set one other hotplate for 

each side of the hob.
The cookware may not be suitable for induction cooking.

The hotplate settings are not transferred when the cookware 

is moved.

Move the cooking container more slowly over the hob or use the 

transfer function.