13
Preliminary
Take the accessories out of the oven.
cleaning
Remove all packaging remnants, e.g. polystyrene
parts, from the oven.
1.
Clean the appliance exterior with a soft
moistened cloth.
2.
Remove the shelf supports and telescopic rails
from the oven.
3.
Clean the oven and the accessories with a hot
detergent solution.
Please observe the operating instructions
furnished with the hob.
Initial burn-in
Before using the appliance for the first time, you
must set the time on the electronic clock.
Heat the empty oven for approx. 30 minutes.
Select top and bottom heat at a setting of 240° C.
Subsequent cleaning
Clean the oven with a hot detergent solution.
Install the shelf supports and telescopic rails.
Time of day
After connecting to the mains, or after a power
Setting the time
failure, the display
0
:
00
will blink.
Press the
>
button and set the current time with
the rotary knob (e.g.
15
:
00
hours).
To correct the time, press the
>
button until the
symbol flashes.
Then set the time.
Note:
The time cannot be corrected if an automatic
function or the timer has been set (to cancel see
”Electronic clock”).
Summary of Contents for U1644N0
