45
Oven Cleaning
– mini oven
Automatic oven cleaning
Oven cleaning is a regeneration programme.
If the self-cleaning panels in the oven are no longer
adequately cleaned during normal day-to-day
operation, they will be regenerated with this function.
They will then be fully functional again.
Take the accessories and utensils out of the
oven.
Before switching on automatic oven cleaning,
thoroughly clean the areas of the oven that do not
have self cleaning panels, e.g. enamelled areas such
as the oven floor, inner door. This will prevent residue
from burning in.
You can select the duration of automatic oven
cleaning via the electronic clock.
The oven becomes very hot during automatic
oven cleaning – always keep children away.
Setting procedure
1.
Rotate the function selector until
Oven Cleaning
is text displayed.
The indicator light
(
comes on and
In
operation
is text displayed.
The oven heats for 1 hour at
270° C.
When Oven Cleaning is complete, a signal
sounds, and
finished
is displayed.
Switching off oven cleaning
2.
Rotate the temperature selector and the function
selector to 0.
The oven is cooled by the fan which continues
running.
When the oven has
Remove the grease film from the parts which are not
cooled down
self-cleaning with a damp cloth.
Wipe the salt residue off the self-cleaning parts with
a damp cloth.
Replacement side, roof and rear panels are available
from customer service.
Note:
exchange of roof and rear panels should only
be carried out by an approved service engineer.
Summary of Contents for U1644N0
