Cleaning and maintenance
en
43
Drain pump is blocked
Note:
Turn the water tap off to prevent
more water from flowing in and to
ensure that it is drained via the pump.
:
Warning
Risk of scalding!
When you wash at high temperatures,
the water gets very hot. If you come into
contact with the hot water, you may be
scalded.
Allow the water to cool down first.
1.
Switch off the appliance. Pull out the
mains plug.
2.
Open the service flap. Use a
screwdriver to release the lock pins
3.
Take the drain hose out of the
retainer.
Remove the sealing cap and pour
the water out into a suitable
container.The container for the
drained water may have to be
emptied severaltimes.
Replace the sealing cap and place
the drain hose back in the retainer.
4.
Carefully unscrew the pump cover;
residual water may leak out.
Clean the pump housing and
remove any foreign objects. The
impeller in the drain pump must be
able to rotate.
5.
Replace the pump cover and screw
firmly in place. Place the kick panel
in the 4 clip-in slots and secure to
the housing using the lock pins.
&
PD[
Summary of Contents for V6540X3GB
Page 1: ...Washer dryer en Instruction Manual and Installation Instructions...
Page 53: ...6...
Page 54: ...6...
Page 55: ...6...
