en
Cleaning and servicing
38
7.
CAUTION - Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
▶
Do not touch the hot detergent
solution.
To allow the detergent solution to
flow out into the container, remove
the sealing cap.
8.
Firmly press on the sealing cap.
9.
Insert the drain hose into the
holder.
Cleaning the drain pump
Requirement:
The drain pump is
empty.
1.
Since water may remain in the
drain pump, unscrew the pump
cap carefully.
‒
The filter insert in the pump
housing may become stuck due
to coarse particles of dirt.
Loosen the dirt and remove the
filter insert.
2.
Clean the interior, the thread on
the pump cap and the pump hous-
ing.
3.
Ensure that the impeller in the
drain pump can rotate.
