en
operation
28
operation
12 Basic operation
operation
12.1 Switching on the appli-
ance
Requirement:
The appliance has
been correctly installed and connec-
ted.
→
"Installation and connection",
▶
Turn the programme selector to a
programme.
Note:
The lighting for the drum goes
out automatically.
12.2 Setting a programme
1.
Turn the programme selector and
set the required programme.
→
2.
If required, adjust the programme
settings.
12.3 Loading laundry
Note:
To prevent creasing, note the
maximum load for the programmes.
→
Requirements
¡
The laundry is prepared and sor-
ted.
→
¡
The drum is empty.
1.
Open the door.
2.
Place the laundry in the drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
12.4 Starting the programme
Requirement:
A programme is set.
"Setting a programme", Page 28
▶
Press
Start Pause
.
a
The display shows the programme
duration or the programme end
time.
a
After the programme has ended,
the display shows: "End" .
12.5 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡
The programme is set.
→
¡
The programme end time is set
and activated.
→
1.
Press
Start Pause
.
The activated programme end time
is paused.
2.
Press
Finish In
until the display
shows the required programme
end time.
3.
Press
Start Pause
.
The changed programme end time
is activated.
12.6 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
1.
Press
Start Pause
.
2.
Open the door.
3.
Add or remove laundry.
4.
Close the door.
5.
Press
Start Pause
.
12.7 Cancelling the pro-
gramme
1.
Press
Start Pause
.
2.
Open the door.
Summary of Contents for WT46G491GB
Page 1: ...Tumble dryer en User manual and installation instructions WT46G491GB...
Page 45: ......
Page 46: ......
Page 47: ......