6. PREPARATION
Preparation
• Ensure the sprayer is securely attached to the vehicle.
• Ensure the sprayer has been thoroughly flushed and drained of all residual
agents from prior uses.
• Clean the suction strainer of any agents residue. It is important to clean the
suction strainer before each use to ensure it is not clogged and to prevent
residual agents from contaminating sprayer contents.
Environment Considerations
• The sprayer should not be used when wind is in excess of 4mph.
• Consideration should be given to members of the public and/or colleagues
when spraying, ensure the area to be sprayed is well ventilated and cordoned
off.
Filling the sprayer
• Choose a safe pesticide mixing and loading area. Choose an outdoor,
well-ventilated area away from unprotected people, animals, food, and other
items that might become contaminated.
• Wear personal protective equipment.
• Turn off power to the sprayer before filling. The vehicle should also be off, with
wheels chocked to prevent unintended movement.
• Remove the fill cap located on top of the sprayer.
• Before filling ensure drain cap is securely tightened.
• Mix agents as instructed on that particular product. Do not mix more than
needed, to reduce wastage and the need to store excess agents mix.
• Pour agent through the filler cap. When done replace filler cap and tighten.
7. OPERATION AND USE
The sprayer come with 50 meshes grid filter for preventing debris come into
pump and cause trouble. In case of leakage, we use the right type of stainless
steel pipe buckle to clamp the pipe. We cannot use glue on the thread tube or
sealant, the glue will be sucked into the pump that will cause damage.
The ATV SPOT SPRAYER equipped with mufti-function spray gun. Rotating
