6
a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect
size or type of hose connectors. To remedy check the air supply and follow
instructions in chapter 3.
b) Grit or gum deposits in the tool may also reduce performance. If your model
has an air strainer (located in the area of the air inlet), remove the strainer and
clean it. Flush the tool out with gum solvent oil or an equal mixture of SAE No
10 oil and paraffin. Allow to dry before use.
5.4. When not in use, disconnect from air supply, clean tool and store in a safe,
dry, childproof location.
