Neilsen CT0700, Instruction Manual

 
 
 
 
When drilling metals, use light oil on the drill 
bit to keep it from overheating. The oil will 
prolong the life of the drill bit and improve the 
drill cutting action. If the bit jams in the 
workpiece or if the drill stalls, release the 
trigger switch immediately. Remove the bit 
from the workpiece and determine the reason 
for jamming. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

GENERAL 

When servicing, use only identical 

replacement parts. Use of any other part 

may create a hazard or cause product 

damage. 

 
DO NOT use solvents when cleaning plastic 
parts. Most plastics are susceptible to 
damage from various types of commercial 
solvents and may be damaged by their use. 
Use clean cloth to remove dirt, dust, oil, 
grease etc. 
 
 

Do not at any time allow brake fluids, 

gasoline, petroleum-based products, 

penetrating oils, etc. to come in contact 

with plastic parts. They contain chemicals 

that can damage, weaken or destroy 

plastic. 

 
DO NOT abuse power tools. Abusive 
practices can damage the tool as well as the 
workpiece. 
 
 
 

DO NOT attempt to modify tools or create 

accessories not recommended. Any such 

alteration or modification is misuse and 

could result in a hazardous condition 

leading to possible serious injury. It will 

also void the warranty. 

LUBRICATION 

 
All of the bearings in these electric tools are 
lubricated with a sufficient amount of high-
grade lubricant for the life of the unit under 
normal conditions. Therefore, no further 
lubrication is required.

13

WARNING

!

WARNING

!

WARNING

!

MAINTENANCE 

ASSEMBLY & OPERATION