Neilsen CT0700, Instruction Manual

GENERAL SAFETY RULES 

Read all instructions

 Failure to follow all 

instructions listed below may result in electric 
shock, fire and/or serious injury. The term 
“power tool” in all of the warnings listed below 
refers to your mains operated (corded) power 
tool or battery operated (cordless) power tool. 
SAVE THESE INSTRUCTIONS 

WORK AREA

Keep work area clean and well lit.

Cluttered and dark areas invite accidents. 
 

Do not operate power tools in explosive 

atmospheres, such as in the presence of 

flammable liquids, gases or dust.

 Power 

tools create sparks, which may ignite the dust 
or fumes. 

Keep children and bystanders away while 

operating a power tool.

 Distractions can 

cause you to lose control. 

ELECTRICAL SAFETY 

Power tool plugs must match the outlet. 

Never modify the plug in any way. Do not 

use any adapter plugs with earthed 

(grounded) power tools. 

Unmodified plugs 

and matching outlets will reduce risk of 
electric shock. 

Avoid body contact with earthed or 

grounded surfaces such as pipes, 

radiators, ranges and refrigerators.

 There 

is an increased risk of electric shock if your 
body is earthed or grounded. 
 

Do not expose power tools to rain or wet 

conditions.

 Water entering the power tool 

will increase the risk of electric shock. 
 

Do not abuse the cord. Never use the cord 

for carrying, pulling or unplugging the 

power tool. Keep cord away from heat, oil, 

sharp edges or moving parts. 

Damaged or 

entangled cords increase the risk of electric 
shock.

When operating a power tool outdoors, 

use an extension cord suitable for 

outdoor use. 

Use of a cord suitable for 

outdoor use reduces the risk

of electric shock  

PERSONAL SAFETY 

Stay alert, watch what you are doing and 

use common sense when operating a 

power tool. Do not use a power tool while 

you are tired or under the influence of 

drugs, alcohol or medication.

 A moment of 

inattention while operating power tools may 
result in serious personal injury. 

Use safety equipment. Always wear eye 

protection.

 Safety equipment such as dust 

mask, non-skid safety shoes, hardhat, or 
hearing protection used for appropriate 
conditions will reduce personal injury. 

Avoid accidental starting. Ensure the 

switch is in the OFF position before 

plugging in.

 Carrying power tools with your 

finger on the switch or plugging in power 
tools that have the switch ON invites 
accidents. 

Remove any adjusting key or wrench 

before turning the power tool on.

 A wrench 

or key left attached to a rotating part of the 
power tool may result in personal injury. 

Do not overreach. Keep proper footing 

and balance at all times.

 This enables 

better control of the power tool in unexpected 
situations. 

Dress properly. Do not wear loose 

clothing or jewellery. Keep your hair, 

clothing and gloves away from moving 

parts.

 Loose clothes, jewellery or long hair 

can be caught in moving parts. 

If devices are provided for the connection 

of dust extraction and collection facilities, 

ensure these are connected and properly 

used.

 Use of these devices can reduce dust 

related hazards. 
 
 
 
 

POWER TOOL SAFETY

WARNING 

!

4 

SAVE THESE INSTRUCTIONS FOR REFERENCE