4
3. SAFETY WARNINGS
SYMBOLS
In this manual and/or on the machine the following symbols are used:
Follow all workshop safety rules, regulations, and conditions when using wrench.
Do not wear watches, rings, bracelets or loose clothing when using air tools.
WARNING! Disconnect from air supply before changing accessories or servicing.
Maintain the wrench in good condition and replace any damaged or worn parts.
Use genuine parts only. Non-authorized parts may be dangerous.
WARNING! Check correct air pressure is maintained and not exceeded. We
recommend 90psi.
Keep air hose away from heat, oil and sharp edges. Check air hose for wear
before each use and ensure that all connections are secure.
Only use sockets which are specifically designed for use with a ratchet wrench.
Wear approved safety eye/face shield, ear defenders, and hand protection.
WARNING! Due to the possible presence of asbestos dust from brake linings,
when working around vehicle brake systems we recommend you wear suitable
respiratory protection.
Maintain correct balance and footing. Ensure the floor is not slippery and wear
non-slip shoes.
Keep children and non essential persons away from the working area.
DO NOT use the wrench for a task it is not designed to perform.
DO NOT use wrench if damaged or thought to be faulty.
DO NOT use wrench unless you have been instructed in its use by a qualified person.
DO NOT carry the wrench by the air hose.
Denotes risk of personal injury, loss of life or damage to the tool in
case of non-observance of the instructions in this manual.
Wear hearing protection.
Wear safety goggles.
Contact with or inhalation of dust coming free during use (e.g.
lead-painted surfaces, wood and metal) can endanger your health
and the health of bystanders. Always wear appropriate protective
equipment, such as a dust mask. Always use proper dust
extraction during use.
Wear gloves.
