8
Trigger from accidentally being activated. (See Figure C.)
11. Turn off the air compressor. Trip the Safety with your finger, and slowly
squeeze the Trigger to release any remaining air pressure from the Die
Grinder. Then, disconnect the air hose from the tool. (See Figure A.)
12. Remove the Grinding Drum from the Die Grinder. Then, store the tool
in a clean, dry location out of reach of children.
INSPECTION, MAINTENANCE, AND CLEANING
1. WARNING! Always make sure the Trigger (4) is in its “OFF”
position, and disconnect the Die Grinder from its compressed air
supply before performing any inspection, adjustments,
maintenance, or cleaning.
2. Before each use, inspect the general condition of the Die Grinder.
Check for loose screws, misalignment or binding of moving parts,
cracked or broken parts, damaged air hose, and any other condition that
may affect its safe operation. If abnormal noise or vibration occurs, have
the problem corrected before further use. Do not use damaged
equipment.
3. Daily: With a clean cloth, remove all dirt, oil, and grease from the Die
Grinder. If necessary, you may use a mild detergent. Do not use
solvents, as damage to the Die Grinder may occur. Do not immerse the
Die Grinder in any liquids.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS
LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL
ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR
SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE
OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT,
