Page 5
M6
ADJUSTING METHOD
Assembly Step
1. As per Pic.7, connect the Handle with Connect Pole, locked by a Hex Bolt M6X30 and a Wing
Nut M6 on the left.
2. On the right, insert the Adjustable Wire into the hole of Index plate, then assemble the Index
plate on the handle and Connect Pole by using Hex Bolt M6x30, Lock Nut M6 and Wing Nut M6.
3. Assemble Wire Crip Bottom Plate on the Connect Pole by using Hex bolt M6x30 and Lock Nut
4. Use the Wire Crip Plate press the Adjustable Wire and Wire Crip Bottom Plate by using Screw
M5x10 and Lock Nut M5. See pic. 8.
