background image

- 4 - 

 

Hazard Signal Word Definitions 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

ABOUT YOUR 175LB AERATOR SPREADER 

 

This 175lb aerator spreader has a roughed steel construction and is designed to aerate and spread 

fertilizer and other materials.    The spikes will penetrate the ground up to 2.5

” deep, allowing for 

compact soil to be loosened.    The aerator spreader promotes a health lawn by opening up the ground 

to allow water, air and nutrients to reach your lawns root system. It is ideal for heavy-traffic areas 

(playgrounds and sports fields) and burned out, drought-damaged lawns.    The aerator spreader has 

the All-In-One feature of being able to aerate and fertilize at the same time, saving you time.    Never 

exceed the hopper

’s rated loaded capacity of 175lbs when operating the equipment.

 

 

 
Technical specifications on the 175lb aerator spreader are provided in the 

“Specifications” section of 

this manual. 
 
 
 
 
 
 

This  is  the  safety  alert  symbol.  It  is  used  to  alert 

you  to  potential  personal  injury  hazards.  Obey  all 

safety  messages  that  follow  this  symbol  to  avoid 

possible injury or death. 

DANGER  indicates  an  imminently  hazardous 

situation which, if not avoided, will result in death 

or serious injury. 

DANGER 

WARNING  indicates  a  potentially  hazardous 

situation  which,  if  not  avoided,  could  result  in 

death or serious injury. 

WARNING 

CAUTION  indicates  a  potentially  hazardous 

situation which, if not avoided, may result in minor 

or moderate injury. 

CAUTION 

CAUTION  used  without  the  safety  alert  symbol 

indicates  a  potentially  hazardous  situation  which, 

if not avoided, may result in property damage. 

CAUTION 

Summary of Contents for CT2214

















Reviews: