5. Fuel and chain oil
■Fuel
The engines are lubricated by oil specially
formulated for air-cooled 2-cycle gasoline engine
use. If oil is not available, use an antioxidant
added quality oil expressly labeled for air-cooled
2-cycle engine use.
RECOMMENDED MIXING RATIO
GASOLINE 25 : OIL 1
These engines are certified to operate on
unleaded gasoline.
The fuel is highly flammable. Do not smoke or
bring any flame or sparks near fuel.
1. FUEL WITH NO OIL(RAW GASOLINE)
– It will cause severe damage to the
engine inner parts very quickly.
2. OIL FOR 4-CYCLE ENGINE USE or WATER COOLED 2-CYCLE ENGINE USE
–
It can cause spark plug fouling, exhaust port blocking, or piston ring sticking.
■
HOW TO MIX FUEL
1. Measure out the quantities of gasoline and oil to be mixed.
2. Put some of the gasoline into a clean, approved fuel container.
3. Pour in all of the oil and agitate well.
4. Pour in the rest of gasoline and agitate again for at least one minute.
5. Put a clear indication on the outside of the container to avoid mixing up with
gasoline or other containers.
■
CHAIN OIL
Use special chain saw oil all year round.
Do not use waste or regenerated oil that can cause damage to the oil pump.
Summary of Contents for CT2298
Page 37: ...15 EXPLODING VIEW...
Page 38: ...13 PARTS LIST...
Page 39: ......
Page 40: ...CANNON EUROPE BVBA Add Akkerstraat 1 Waardamme Oostkamp 8020 Belgium Made in China...
