GLUE GUN – INSTRUCTIONS FOR USE
The glue sticks to many surfaces including wood, plastic ,paper and cardboard
OPERATION INSTRUCTIONS
Step 1
Insert one of the glue sticks through the
tunnel on the back of the gun
Step 2
Plug cord into an electrical outlet and
wait 5 minutes to heat up the glue.
Then apply the glue by continuously
pressing the trigger.
Step 3
Release the trigger to stop the flow of glue.
Apply pressure on the glued parts for
approximately 60 seconds for complete
bonding.
WARNING / CAUTON:
Do not touch the nozzle or melted glue. Operating temperature of the gun is 150
0
C
Always unplug the cord when the gun is not in use
Keep out of reach of children and store in a safe place.
