4
Safety instructions and hazard warnings
Please read the entire operating instructions before using the products for the
first time.They contain important information about the correct operation.
The guarantee/warranty will be void if damage is incurred resulting from non
-compliance with the operating instructions.Liability for any and all conseq-
uential damage is excluded!
We do not assume any liability for damage to progerty or personal injury
caused by improper use or the failure to observe the safety instructonslln
such cases the guarantee/warranty will be void.
The unauthorised convcrsion,modification of disassembly of the products
is inadmissible because of safety and approval reasons (CE).
7. Rath eri sh lift the
front work bedplate,
open the frond left and
right side cover board,
uniform left and right
side plank from outside
to inside,put the front
worktable flatewise.
8. Put down the small
gap of top cover of
machinery (cover of
work room) fasten to the
left and right booth side.
At the same time push
down four small gap of
cover board and fast to
the tour side cover
board protruding button.
9. The front of left and
light cover board can be
put flatwise outside, and
also can be remove
outside. The remove
one can extend the
operate space. Move
two cover board can
combine two machines
together, it can be
folded and deployed by
hands without any tools.
10. After pulling the
power cord, the small
door can be closed.
There is a small hole
for power cord, and will
not affect the use of two
machines.
11.Before deploying
and pack away,please
press the shrink button,
the power cord will
retract automatically,
then close the small
door; the step of deploy,
according to the reverse
order of fold.
12.When put two set
together to use, only to
dismantle the right side
booth side of left set
and left booth side of
right set, then put
together two sets
together.
