2
1. SAFETY
WARNING! DO NOT
use wrench if damaged or thought to be faulty.
WARNING!
Disconnect from the air supply before changing accessories or servicing.
WARNING!
Due to the possible presence of asbestos dust from brake linings, when working
around vehicle brake systems we recommend you wear suitable respiratory protection.
WARNING!
Check correct air pressure is maintained and not exceeded. We recommend
90psi.
DO NOT
use the wrench for a task it is not designed to perform.
DO NOT
use worn, or damaged sockets
DO NOT
use the wrench unless you have been instructed in its use by a qualified person.
DO NOT
use the wrench for a task it is not designed to perform.
DO NOT
carry the wrench by the air hose, or yank the hose from the air supply.
DO NOT
operate the wrench if you are tired or under the influence of alcohol, drugs or
intoxicating medication.
DO NOT
carry the wrench with your hand on the power trigger in order to avoid unintentional
starting.
DO NOT
direct air from the air hose at yourself or others.
Maintain the wrench in good condition and replace any damaged or worn parts.
Use genuine
parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
Keep air
hose away from heat, oil and sharp edges. Check air hose for wear before each use and
ensure that all connections are
secure.
Only use impact sockets which are specifically designed for use with an impact wrench.
Wear approved safety eye/face shield, ear defenders and hand protection.
Follow all workshop safety rules, regulations, and conditions when using the wrench.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip
shoes.
Keep children and non essential persons away from the working area.
When not in use disconnect from air supply and store in a safe, dry, childproof location.
2. INTRODUCTION
Push button style forward/reverse switch enables one handed operation. Two stage trigger
design offers increased control with feather touch trigger for running up to 272Nm and fully
depressed for full torque. Features hammer cage support mechanism to reduce tool vibration
while in operation. Composite casing with soft grip makes the tool lighter, easier to handle and
helps to reduce vibration and chill. Handle exhaust with built-in silencer to help reduce noise
level and limits circulation of brake dust on wheel applications. Suitable for heavy-duty use in
the professional garage.
3. SPECIFICATION
Clutch Type : Twin Hammer Air Pressure : 90 psi
Max Torque : 1288 Nm Air Consumrtion (25%) : 9.5 SCFM
Max Torque : 950 ft-lb Weight : 2.2 kg
Free Speed : 7000 rpm Length : 170 mm
Noise : 92.88/103.88 dBA Air Inlet : 1/4"
