4
5. OPERATION
WARNING! Ensure you read, understand and
apply safety instructions before use.
5.1.
Only use impact sockets which are specifically
designed for use with an impact wrench.
5.2.
Connect the wrench to the air hose as in section 4.
5.3.
Place the socket fully over the subject nut and
depress the trigger to operate the wrench.
5.4.
To change the torque direction depress the button
in fig.1 and release. Depress and release again for
both directions. If the button remains outermost, then reverse direction; innermost then
forward direction. See also
"F"
and
"R"
symbols on the impact wrench handle.
5.5.
A "soft start" torque of 272Nm is available by depressing the primary "feather touch" trigger
in fig.1.
5.6
Further depression of the secondary trigger in fig.1 provides the maximum torque available.
DO NOT
use any additional force upon the wrench in order to remove a nut.
DO NOT
allow the wrench to free run for an extended period of time as this will reduce
bearing life.
6. MAINTENANCE
WARNING!
Disconnect the wrench from the air supply before changing accessories,
servicing or performing maintenance.
Replace or repair damaged parts.
Use genuine parts only. Unauthorised parts may be
dangerous and will invalidate the warranty.
6.1.
If the air system does not have an oiler, lubricate the air wrench daily with a few drops of
air tool oil dripped into the air inlet.
6.2.
Clean the wrench after use with a mild detergent on a moist cloth.
6.3.
For a full service contact your local service agent.
6.4.
When not in use, disconnect from the air supply, store in a safe, dry, childproof location.
