6 nozzle spray
5. ASSEMBLY
•
Fasten the two lance clips to the sprayer tank with the two screws
supplied.
•
Press the rubber washer onto the drain pipe, screw on the drain cap.
•
Attach Spot Spray Gun Hose to Pump.
•
Slide the hose clamp over the hose.
•
Push the hose onto the pump.
•
Slide the hose clamp over the pump connector and tighten.
Attach Hose Guide to Tank
•Thread the hose through the hose guide.
•Attach the guide to the side of the tank using the flange bolt.
Attach Hose to Spot Spray Gun
• Slide the hose clamp over the hose.
Pressure gauge
(Optional)
Clearly display
the pressure
valve,easy to
adjust the
pressure.
