- 12 -
WARNING
Improper maintenance and storage of the push sweeper may void your warranty.
MAINTENANCE
•
After each use clean material out of hopper.
•
Rinse/dry inside and outside of the sweeper after each use.
•
Periodically check all fasteners for tightness.
•
Twice a year apply a few drops of light multipurpose oil to the brush shaft bearings.
•
Annually clean and lightly lubricate all moving parts.
•
Every two years remove and clean gears and apply an even coat of light synthetic grease.
•
Use a glossy enamel spray paint to touch up scratched or worn painted metal surfaces.
•
Never exceed the hopper load capacity rating of 7 Cu. Ft. it will damage the bag.
LUBRICATION
The bearings in the sweeper have been pre-lubricated at the factory; however it is recommended that a
few drops of light multipurpose oil should be added to the brush shaft bearings twice a year. Also, the
wheels should be removed too clean gears every two years. After cleaning apply an even coat of light
synthetic grease.
NOTE: To remove wheel, use a screwdriver to pop off hub cap, remove the “E” ring and flat
washer.
Maintenance and Storage
