Cautions:Pleasereadsafetyprecautions carefullybeforeusingtheproduct.Inordertoget
better massage, please wear the sleeves properly.
1.Make sure to follow the directions on the tag and wear the warps on your legs properly
5. Take up the controller and press the on-off button to start themachine.
• It will begin with mode 1 and strength 1 (The lowest) by default.
• It will shut off after 2O minutes (You can restart it manually).
6. Press "Mode" button to switch and enjoy the
different massage modes, the difference between
these 2 modes can be seen on Page 3 - Page 4.
Mode
2.Check and adjust the position andtightness asbelow, don't wrap tootight.
Use the extensions for bigger calves.
Extensions
7. Press "Air Pressure" button to select intensity.
1) Three pressure levels forchoice.
We suggest you use the lowest level at the beginning.
2) You can change the tightness of the
warps to make the strength suitable as you like.
8.
Press on-off button to turn it off.
Pressure
Usage in FAQs 4
3. Plug the power adapter into the controller and socket on each side.
4.Inserttwoairhoseplugsintothecontrollercorrectlyandcompletely.
›
We suggest 2Omins each time as the best. After 20-minute
work, it will shut down automatically but you can restart it.
9. Unplug the power adapter from the socket.
10.Pull out theplugs of the power adapter and
air hoses from the bottom of the controller.
11.Take off the wraps, fold it into the storage bag or box.
Make sure it is aligned to the groove
jacks for air hoses
Warnings:
