CLEANING THE APPLIANCE
CAUTION
- Remove the plug from the outlet before emptying the dust container or cleaning the filters.
- Empty the dust container regularly, or, at the latest, when the dust in the container reaches the MAX mark.
- The filters must be cleaned regularly in order to prevent overloading the motor.
- The HEPA filter should not be cleaned with water. Use a brush or a dry cloth.
- The dust container and all filters must be completely dry before you insert them into the appliance for use.
- Do not use corrosive or abrasive cleaning agents to clean the vacuum cleaner as they could damage the surface.
EMPTYING THE DUST CONTAINER
1
Hold down the release button on the handle of the dust container and remove
the dust container from the vacuum cleaner.
2
Hold the dust container over a dustbin and press the release button to open
the bottom cap of the dust container.
3
Carefully tap the side of the dust container.
4
Close the bottom cap of the dust container. You should hear a click when it is locked in place.
5
For a more thorough cleaning of the dust container, the filter unit can be removed from the
dust container. There is an arrow mark on the side of the container (as shown).
6
If the filter unit is inserted correctly in the dust container, the upper arrow points towards the
lower arrow of the closed lock symbol (as shown).
7
To remove the filter unit, turn the dust container lid until the upper arrow points towards the
lower arrow of the open lock symbol.
8
Pull the filter unit up and out.
9
Clean the dust container and the filter unit if necessary with a damp cloth
and mild detergent. Then wipe with a dry cloth.
10
When cleaning the container, make sure the HEPA filter does not get wet
(see "Cleaning the HEPA filter").
8
