Tel-A-Greeter 204
15
Rev. 04/19/2000
Review message
The review message commands allows the user to listen to any of the 4
messages. After the command is entered the requested message plays.
Dial
#
at any point to stop the playback. An error occurs if you select a
message that has not been recorded.
Syntax:
* 6 0 # 0 1 #
Review message number 1
* 6 0 # 0 2 #
Review message number 2
* 6 0 # 0 3 #
Review message number 3
* 6 0 # 0 4 #
Review message number 4
Set line message number
Sets which
message number
will play on which
line number
.
Valid
message number range is 01-04.
Syntax:
* 4 1 # X X #
Set line 1 to play message number XX
* 4 2 # X X #
Set line 2 to play message number XX
* 4 3 # X X #
Set line 3 to play message number XX
* 4 4 # X X #
Set line 4 to play message number XX
Request line message number
Plays a series of beep tones to indicate the
message number
set to play
from the entered
line number
.
1 beep = message number 1
2 beeps = message number 2
3 beeps = message number 3
4 beeps = message number 4
Syntax:
* 3 X #
Request line X message number
