Tel-A-Greeter 204
9
Rev. 04/19/2000
CPC
The TAG is designed to use the Calling Party Control signal sent from
the central office to sense when the caller has hung up. Not all central
offices support CPC signaling. If the TAG does not receive the CPC
signal it may take as long as 90 seconds before the unit recognizes the
hang-up and can answer another call.
Tel-A-Greeter controls and indicators
Front panel
Rear panel
Factory
jack
(not used)
Program jack:
Connect normal
home telephone to
record messages
and program unit.
Power
supply
jack
Line status lights:
Off = line idle
On = call in progress
(4) RJ-11 telco inputs:
Connect 3 phone lines + 1
message on hold port (using
special cable and ProAdapter),
or connect 4 phone lines if
MOH not needed.
