Tel-A-Greeter 204
16
Rev. 04/19/2000
Mode request
The mode request command plays a series of beep tones to indicate the
current mode of the selected line.
1 beep = day mode
3 beeps = MOH mode
Syntax:
* 0 0 # 0 1 #
Request line 1 mode
* 0 0 # 0 2 #
Request line 2 mode
* 0 0 # 0 3 #
Request line 3 mode
* 0 0 # 0 4 #
Request line 4 mode
Set line to day mode
Sets a line to day mode.
Syntax:
* 0 1 # 0 1 #
Set line 1 to day mode
* 0 1 # 0 2 #
Set line 2 to day mode
* 0 1 # 0 3 #
Set line 3 to day mode
* 0 1 # 0 4 #
Set line 4 to day mode
Set line to MOH mode
Sets a line to MOH mode.
Syntax:
* 0 3 # 0 1 #
Set line 1 to MOH mode
* 0 3 # 0 2 #
Set line 2 to MOH mode
* 0 3 # 0 3 #
Set line 3 to MOH mode
* 0 3 # 0 4 #
Set line 4 to MOH mode
Set Answer ring
Sets how many rings the unit waits before answering incoming calls.
Valid settings are 01-15 rings. This setting applies to all lines set to day
mode.
Syntax: (XX = any value 01 - 15)
* 1 1 # X X #
Set answer rings to XX
