Troubleshooting
144
10030881 Rev. B 12-2008
Service Manual
Error Codes
When the OxiMax N-600x pulse oximeter detects an error condition, it displays “EEE”
followed by an error code of up to three digits.
Figure 120.
Error Condition Screen, Battery Failure
READING
TRENDS...
None
Yes
Yes
When the oximeter
needs more than
four to six seconds to
retrieve trend data
from memory.
Completely retrieve sensor
data or select ABORT.
REPLACE
SENSOR
None
No
Yes
When the sensor or
cable wiring is
defective.
Temporarily acknowledge by
pressing the ALARM SILENCE
key. Replace sensor.
RESET
DEFAULTS?
10
No
Yes
When attempting to
reset oximeter to
factory default
setting by pressing
the RESET softkey on
the PARAMS menu.
Leave default settings as they
are by selecting NO, or revert
back to the original factory
default settings by selecting
YES.
SAVE
DEFAULTS?
10
No
Yes
When attempting to
save current settings
as power-on defaults
by pressing SAVE in
the PARAMS menu.
Confirm the new institutional
default settings by selecting
YES, or leave default settings
as they are by selecting NO,
SENSOR
DISCONNECTED
None
No
Yes
When the sensor is
disconnected from
the pulse oximetry
cable, the cable is not
connected to the
oximeter, or the cable
wiring is defective.
Temporarily acknowledge by
pressing the ALARM SILENCE
key. Connect the cable and
sensor to the oximeter,
reconnect the sensor, or
check all connections. If this
does not clear the condition,
replace the cable and/or
sensor.
SENSOR TYPE
5
No
No
First message
displayed when a
sensor is connected
to the oximeter.
Automatically clears on
time-out.
Table 24.
Common Prompts and Error Messages
Message
Time-
out in
secs
Exit on
Alarm?
Exit on
Alarm
Silence?
Displayed
Resolution
Summary of Contents for OXIMAX N-600X Series
