Service Manual
Installation
Oxinet III
13
Connect the Router/Switch to the Central Station
Connect a Cat5 Patch cable from any of the numbered RJ-45 LAN ports on the
back of the Router/Switch to the network port in the back of the Central Station
(Figure 3).
Connect the Central Station to Pager Transmitter (Optional)
This procedure needs to be perform only if your system includes the optional
Pager Transmitter.
1
Connect power cord from the power jack on the back of the Central Station to one
of the battery backed-up AC power outlets of the UPS.
Caution: To avoid damaging the Pager Transmitter, connect its antenna
before connecting power to the Pager Transmitter.
2
Connect the antenna for the Pager Transmitter to the BNC connector on the Pager
Transmitter (Figure 3).
3
Connect the Central Station’s antenna as shown in Figure 3.
4
Connect one end of the two-ended RS-232 serial cable to the
COM1
serial port of
the Central Station, and connect the other end to the
RS232C Interface
serial port
on the left side of the Pager Transmitter (Figure 3).
5
Connect the DC power cable into the
12V DC
power port of the Pager Transmitter
and plug the AC cord into the AC power outlet (Figure 3).
6
Connect the mouse and keyboard to the Central Station (Figure 3).
Connect the Printer to the Central Station
You need to connect a printer to the Central station in order to print Oxinet III
reports.
1
Connect the printer cable from the printer to the parallel port connector on the
back of the PC portion of the Central Station (Figure 3).
2
If you are using a USB printer, connect the USB cable to the USB port on the back
of the PC portion of the Central Station (Figure 3).
Summary of Contents for Oxinet III
