Service Manual
Installation
Oxinet III
17
3
Connect the DC power cable into the
12V DC
power port of the Pager Transmitter
and plug the AC cord into the AC power outlet (Figure 4).
4
Connect the PC portion of the Central Station to an AC power outlet, connect the
DC power to the Monitor Portion of the Central Station (via the DC power cable),
and connect the mouse and keyboard to the Central Station (Figure 4).
Connect the Printer to the Central Station
You need to connect a printer to the Central station in order to print Oxinet III
reports.
1
Connect the printer cable from the printer to the parallel port connector on the
back of the PC portion of the Central Station (Figure 4).
2
If you are using a USB printer, connect the USB cable to the USB port on the back
of the PC portion of the Central Station (Figure 4).
Summary of Contents for Oxinet III
