manualshive.com logo in svg

Nellis Engineering Logic Genesis, Owner'S Manual

The Nellis Engineering Logic Genesis embodies cutting-edge technology and innovation. Discover the true potential of this exceptional product with our comprehensive and informative owner's manual. Download it for free at 88.208.23.73:8080 to unleash the full power of Logic Genesis, seamlessly guiding you through its features and functionalities.

Share
Download
background image

Genesis Manual  Rev1.6               Copyright 2018,  Nellis Engineering, Inc.  

20

 

Warranty 

 

The  Genesis  DPV  and  battery  charger  have  a  1  year  limited  warranty  on  all  materials  and 
workmanship  provided  by  Nellis  Engineering  Inc,  when  used  for  their  intended  purposes  under 
normal conditions, with the following exceptions. 

 

1.  The batteries have a one year warranty on materials and workmanship from date of  
     delivery.  The battery warranty does not cover abuse, neglect or operator error. 

 

2.  Damage from flooding of the DPV due the failure of o-ring(s) that are serviceable by the  
     owner or from damage to the DPV structure, is not covered under this warranty.  All DPVs  
     pass an extensive pressure and vacuum leak test before shipping to ensure they are leak  
     free when delivered from the factory.    

 

3.  The battery charger is not covered for water damage. 

 

4.  Structural or cosmetic damage from abuse or corrosion is not covered.   

 

5.  Damage from modification, or attempted modification. 

 

6.  Damage from servicing by unauthorized individuals. 

      

7.  Nellis Engineering, Inc. will not be liable for any loss, damages or expenses, to include  
     incidental, special, consequential or collateral damages, arising directly or indirectly  
     from the sale or use of the equipment.   
 
THIS  WRITTEN  WARRANTY  IS  THE  SOLE  WARRANTY  AND  SUPERSEDES  ALL  OTHER  EXPRESSED  OR 
IMPLIED WARRANTIES, INCLUDING WARRANTY OF FITNESS OR MERCHANTABILITY, TO THE EXTENT 
PERMITTED  BY  APPLICABLE  LAW.    SHOULD  AN  IMPLIED  WARRANTY  BE  REQUIRED  BY  LAW,  IT  IS 
LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. 
 
To  receive  warranty  repair,  contact  the  factory  for  an  RMA  number  prior  to  returning  any 
equipment  for  repair.    All  shipping  charges  to  and  from  the  factory  are  the  responsibility  of  the 
equipment owner. 

SPECIFICATIONS 

600 

1200 

1500 

Weight - lbs (kg) 

  

33.5 (15.2) 

44.9 (20.4) 

49.5 (22.5) 

Length - inch (cm) 

  

24.3 (61.7) 

30.8 (78.1) 

33.6 (85.2) 

Max Static Thrust - lbs (kg) [N] 

  

90 (41) [400] 

Approx. Range at 150 fpm (45mpm) - mi (km)     

6.9 (11.1) 

13.8 (22.2) 

17.3 (27.8) 

Approximate Range at 2 knts 

  

5.0 (6.4) 

10.0 (12.9) 

12.5 (16.1) 

Standard Depth Rating 

  

660fsw / 200msw 

Battery Type 

  

Lithium Ion Polymer 

Nominal Battery Capacity - Wh

  

675 

1350 

1687 

Nominal Battery Voltage

  

2ea at 29.6V in series (59.2V Total) 

Charger Input Voltage  

  

96-264VAC 

Recharge Time 

  

5 hours 

10 hours 

12 hours 

Summary of Contents for Logic Genesis





















Reviews:

No comments

Related manuals for Logic Genesis

Kia OPTIMA plug-in hybrid Emergency Rescue Manual Manual preview
OPTIMA plug-in hybrid
Brand: Kia Pages: 28

Brands by name

Popular brands

Load more brands