Nelsen Corporation C Series, Programming Manual

-6-

C-Series 1" & 1-1/4" WS1 Manual

System Setup

6  

Day Override and Gallon Capacity can not both be set to “oFF” at the 

same time.

Table 7 

DIR/Time Clock Options 

Filter 

Settings

6

  DIR 

Time Clock 

Reserve Capacity 

Softener 

Regenerant 

BW Only 

Day Override  Gal Capacity

  Yes 

Automatically Calculated 

Yes 

Off 

Any

Yes 

If desired enter a value less   

Yes 

Yes 

Yes 

Off

Any Number

than estimated capacity 

  Yes 

Yes 

Automatically Calculated 

Yes 

Any Number 

Auto

Yes 

Yes 

If desired enter a value less 

Yes 

Yes 

Yes 

Any Number

Any Number

than estimated capacity

Yes 

None 

Yes 

Yes 

Yes 

Any Number 

Off

Capacity” set to “AUTO” and the “Regeneration Time 

Option” set to “Normal” or “ on 0”. The actual 

reserve capacity is compared to the gallons capacity 

remaining immediately prior to the preset regeneration 

time. A regeneration will occur if the actual reserve 

capacity is less than the gallons capacity remaining. 

The actual reserve capacity is calculated by using the 

estimated reserve capacity and adjusting it up or down for 

actual usage.

The estimated reserve capacity for a given day of the 

week is the maximum value stored for the last three 

non-trivial water usages (i.e. more than 20 gallons/day) in 

seven day intervals.