25
Tucker GmbH, Mail / Post: Max-Eyth-Str.1, 35394 Gießen, Germany.
Stud welding unit N1500i
As of: Aug 12.2021
Manual part number: BE 1221
because electromagnetic disturbance must be expected in external electrical
equipment as a condition of its process.
•
The operating location of the Nelweld N1500i is limited to areas of an industrial
and trading nature. When used in residential and commercial areas the user of
the system must ensure that the electromagnetic fields that occur during welding
do not cause any dangers to persons and property.
•
The Nelweld N1500i is only permitted to be used with the cited accessories.
Alterations to the Nelweld N1500i not authorized by the manufacturer are
forbidden.
•
The Nelweld N1500i is only to be operated with the plant com- ponents listed in. It
is not permitted to configure the equipment with that of other manufacturers.
Furthermore, the observance of the general and particular safety advice in these
operating and service instructions as well as relevant accident prevention
regulations (BGV D1
1
; BGR 500
2
) falls under indented use.
•
UVV: „Electrical installation and operating materials “(2001)
•
UVV: „BGR 500: Operating working material (2007)
Operation in accordance with regulations also includes observing the general and
special safety instructions contained in this documentation as well as the local
regulations on accident prevention.
Warning!
Contravention of intended use or usage exceeding this, is
inadmissible and possibly dangerous.
The manufacturer is not liable for damage resulting hereof; the
opera- tor alone bears the risk!
2.4 Guarantee and liability
Guarantee and liability claims in case of physical injury and damage to property are
excluded if they are due to one or several of the following causes:
•
Non-intended use of the Nelwled N1500i welding unit
•
Non-compliance with the operating instructions of the Nelweld unit and associated
