Tucker GmbH,
Mail / Post:
Max-Eyth-Str.1, 35394 Gießen, Germany
Stud welding unit N800i
As of 24.08.2021
Manual part number: BE 1227
17
Apprentices or personnel receiving on the job training may:
•
only work with the welding unit under supervision of an experienced person
Personal protection equipment (PSA):
Welding spatter, arcs and a noise level of 75dB. Consequently, the wearing of the
following personal protection equipment is a mandatory stipulation:
Symbol
Beschreibung
Hardly inflammable protective clothing covering the whole body as per EN
470
Welder's protective filter with safety plates according to DIN EN 169
Protective gloves as per DIN 4841 Part 4
Helmet as per EN 397 (in case of overhead welding)
Ear protection (plugs; muffs) as per DIN EN 352 is recommended
During welding, exposed parts of the welding head are current carrying. For this
reason wear no electrically conductive jewelry (wrist watch or chain).
Protective measures at the workplace:
The workplace must be such that people in the vicinity are adequately protected
against the harmful effects of optical radiation.
Space limiters and protective screens must be placed in such a way that the reflection
and permeability of any radiation are for the most part avoided.
Combustible and inflammable materials must be removed from the welding zone.
A guarantee must be given that a fire extinguisher is to hand at the workplace.
Ensure that the workplace is sufficiently ventilated and adequately lit.
Summary of Contents for N800iTM
Page 18: ......
