Chapter 4 Installation
52
Figure 4-6: DIMM Installation
Step 1: Open the DIMM socket handles
. Open the two handles outwards
as far as they can. See
Figure 4-6
.
Step 2: Align the DIMM with the socket
. Align the DIMM so the notch on
the memory lines up with the notch on the memory socket. See
Figure 4-6
.
Step 3: Insert the DIMM
. Once aligned, press down until the DIMM is
properly seated. Clip the two handles into place. See
Figure 4-6
.
Step 4: Removing a DIMM
. To remove a DIMM, push both handles outward.
The memory module is ejected by a mechanism in the socket.
