Version: 4.0
28.08.2017
KEN001BT55X
10
Right:
water flows along with the hose.
(The ground should be at least 5cm
lower than the draining hose outlet).
Wrong:
the hose is bent or the end of the hose is
immersed in the water.
EN
CONTINUOUS DRAIN
THE METHOD OF CONNECTING THE HOSE
NOTE
The ice may block the hose and water will flow into the unit or room.
How to handle this situation:
Please stop the unit if the water inside the hose frozen.
Ove
r-te
mp.
OnS
/
ta
Ofn
f
d
/
by
%7
;
DeT
f
a
r
n
o
k
s
f
t
u
/
ll
1. Take out the water
bucket.
3. Replace the bucket
back to position.
2. Connect the hose to water
outlet.
Use clip to fix the hose to
outlet.
Please get the hose ready:
The inner diameter of the hose is 16mm.
CAUTION
Check the hose connection
If leaking, may wet the room.
Make sure there are no dents in the hose and that the hose is beneath the water
outlet. Check if there is ice inside the hose.
