Version: 5.0
20.01.2017
7
EN
TROUBLE SHOOTING
Problem
Method of disposal
Smoke alarm device does not
sound when tested.
1. Adjust the alarm onto the bracket and turn the
alarm body clockwise, until matching well on the
bracket.
2. Clean smoke alarm device.
Please refer to the „maintenance and cleaning“
section.
3. Please replace with a new alarm.
The alarm „beeps“ and the red
LED flashes once every 40
seconds.
The battery is under low battery status, please
replace the smoke alarm device.
Smoke alarm device beep
occurs every 40 seconds
(alarm goes into fault mode).
Clean smoke alarm device. Please refer to the
„maintenance and cleaning“ section.
Purchase and change smoke alarm device if the
problem still exists
Smoke alarm device sounds
false alarms intermittently or
when residents are cooking,
taking showers, etc.
1. Press test button to pause alarm.
2. Clean smoke alarm device.
Please refer to the „maintenance and cleaning“
section.
3. Move smoke alarm device to new location and
press test button.
The alarm sounds different from
usual.
lt starts and stops.
1. Clean smoke alarm device.
Please refer to the „maintenance and cleaning“
section.
2. Please replace with a new alarm.
