background image

 Page 12  

P: 419.542.7751 ● F: 419.542.6690 ● 

800.782.6761

 ● nemcofoodequip.com

 

PRODUCT WARRANTY 

Except  as  otherwise  provided  below,  Nemco  Food  Equipment,  Ltd.  (“Nemco”)  warrants,  to  the  original  user,  its 
PaniniPro Sandwich Press to be free of electrical and mechanical defects in material and workmanship under “normal 
use” (defined below) for the following periods: (a) one (1) year Labor, (b)  two (2) years Parts.        

The warranty provided for herein shall be limited to parts and labor.  Any determination that a product is defective 
or covered by this warranty, shall be made by Nemco, in its sole discretion.  The determination of whether to repair 
or replace a defective, covered product, or to refund the purchase price for the product, will be at Nemco’s sole 
discretion.  This warranty does not cover products used outside the United States, or damages caused by accident, 
misuse, negligence of any person other than Nemco, current or voltage other than stated on the appliance, fire, 
flood or other casualty.  Any alteration to the product or unauthorized repair voids this warranty.  For purposes of 
this warranty, the phrase, “normal use” shall mean the use of the product in connection with food in accordance 
with the product manual accompanying the product. 

 

Nemco shall be responsible only for repairs or replacements of defective parts performed by Nemco’s authorized 
service  personnel.    Authorized  service  agencies  are  located  in  principal  cities  throughout  the  continental  United 
States, Alaska and Hawaii. 

 

THE  FOREGOING  WARRANTY  IS  EXCLUSIVE  AND  IN  LIEU  OF  ALL  OTHER  WARRANTIES,  EXPRESS  OR  IMPLIED.  
NEMCO EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY THAT ANY OF ITS PRODUCTS IS MERCHANTABLE, FIT FOR 
A  PARTICULAR  PURPOSE,  OR  DOES  NOT  INFRINGE  ON  THE  RIGHTS  OF  ANY  THIRD  PARTY.    THE  FOREGOING 
WARRANTY SHALL BE NEMCO’S SOLE AND EXCLUSIVE OBLIGATION.  ANY PERSON’S (BUYER, USER OR OTHERWISE) 
EXCLUSIVE REMEDY AGAINST NEMCO, AND NEMCO’S SOLE OBLIGATION, FOR ANY AND ALL CLAIMS, WHETHER 
FOR  BREACH  OF  CONTRACT,  WARRANTY,  TORT  (INCLUDING  WITHOUT  LIMITATION  NEGLIGENCE),  OR 
OTHERWISE, SHALL BE LIMITED TO NEMCO REPAIRING OR REPLACING THE PRODUCT, OR, AT NEMCO’S OPTION, 
REFUNDING THE PURCHASE PRICE THEREFOR.  IN NO EVENT SHALL NEMCO HAVE ANY LIABILITY FOR DAMAGES 
IN AN AMOUNT EXCEEDING THE PURCHASE PRICE OF THE PRODUCT, NOR SHALL NEMCO HAVE ANY LIABILITY FOR 
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES.

  Any person desiring to make any claim against Nemco must 

do so within six (6) months after expiration of the applicable warranty period, or such claim be forever barred. 

 

NOTE: WARRANTY DOES NOT COVER DAMAGE TO THE GRID OR GRID COATING.  IT IS NEMCO’S SOLE DISCRETION 
TO DETERMINE IF A GRID OR GRID COATING CLAIM IS WARRANTED. 

 

Model #:______________________________ 

Serial #: _______________________________ 

Installation Date: ________________________ 

Summary of Contents for 6900A













Reviews: