Page | 4
P: 419.542.7751 F: 419.542.6690 800.782.761 nemcofoodequip.com
49234A
Control Features
The range will not operate without an appropriate pan or vessel in place on the
cooktop. After a few seconds, the display will flash ‘00’ indicating that no pan is
present. If the pan is removed during cooking, the unit will turn off after about 40
seconds and the display will show ‘00’. Resume cooking by placing the pan on
the cooktop and pressing the ‘Start/Stop’ button.
If the temperature of the cooktop reaches 260
o
C or 500
o
F, the unit turns off
automatically and displays an error code. This can happen if a pan is empty or is
allowed to boil dry. Allow the unit to cool off. Restart by pressing power on/off
button
If the voltage or current in the device is abnormal it will shut itself off and display
an error code.
Small objects such as a knife or spoon will not be ‘seen’ as a valid pan by the
range and it will not operate, however, do not place items other than induction
cookware on the range surface.
Power On/OFF
Start/Stop
Display
Mode
Min/Sec
Timer
Multi-Purpose Knob
