Page | 5
P: 419.542.7751 F: 419.542.6690 800.782.761 nemcofoodequip.com
49232A
Operating Instructions
1.
Plug the unit in to the appropriate power outlet. The display will show four red dots
when voltage is present.
2.
Press the red power on/off button
. The display will show ‘
00
’ and the unit is now in the
ready state.
3.
Place an appropriate pan on the glass cooktop, centering it on the target.
4.
Press the
Power Up ‘
START/STOP
’ button
. The display will show
‘
06
’, and the fan will
start. The range is now cooking at power level 6.
5.
Press the Power UP
‘ʌ’
button to increase the power setting.
6.
Press the Power Down button
‘v’
to decrease the power level.
7.
The power level will adjust from 01 to 10 for cooking powers. Below power level 01,
there are 7 holding or warming settings, H1 thru H7 that can be used to hold food at a
constant temperature.
8.
While cooking or warming, press the
‘START/STOP’
button to stop the cooking cycle, or
remove the pan.
If the pan is removed and replaced within approximately 4
0 seconds while the ’
00
’
symbol is flashing on the display, the system will automatically resume heating at the
previous setting. After 40 seconds with no pan, the display will show a steady
‘
0
0’
.
Pressing the
‘START/STOP’ button
will resume operation at the previous setting if the
pan is present.
9.
The power level can be adjusted ‘on the fly’ at any time
while the unit is heating.
10.
When the unit is turned off using the Power On/Off button, the cooling fan may
continue to operate for a short period of time.
11.
Do not unplug unit until the fan has stopped running.
